Tel: 01273 930040

Led Driver Oti Dali 90/220-240/1a0 Lt2 L 4052899494268

Be the first to review this product

Availability: In stock

Only 11 left

Excl. Vat: £27.60 Incl. Vat: £33.12
OR

Led Driver Oti Dali 90/220-240/1a0 Lt2 L 4052899494268 LEDOTIDALI901A0 By Osram

Led Driver Oti Dali 90/220-240/1a0 Lt2 L 4052899494268

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Related links:
LED Power Supply and Control Gear

Details

Osram Led Driver Oti Dali 90/220-240/1a0 Lt2 L 4052899494268 LEDOTIDALI901A0

OPTOTRONIC Intelligent - Dimmable DALI

OTi DALI 90/220-240/1A0 LT2 L Generation 3

Product Benefits:

Fully programmable via software (DALI Interface)
Flexible current setting (LEDset2)
Lifetime: up to 100,000 h (temperature at Tc = 65 C, max. 10 % failure rate)
High-quality dimming of 1 to 100 % by amplitude dimming (except 80 W versions)
High quality of light thanks to <1% output ripple current
Very high efficiency
Very low standby power consumption: < 0.15 W (SELV)*, < 0.25 W (non-isolated)
Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Areas of Application:

Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
Suitable for use in luminaires with flexible current setting (DALI, CLO, LEDset)
Suitable for indoor SELV and non-SELV installations
Suitable for luminaires of protection class I

Versatile scope of application due to DALI (GII) Ideology

Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Luminaire information for easy maintenance

EAN: 4052899494268
Nominal output power: 13.5-90 W
Galvanic isolation: Non isolated
Input voltage: 198-264 V
Mains frequency: 50-60 Hz
Output voltage: 54-240 V
U-OUT (working voltage): < 250 V
Output current tolerance: ?3 %
Output ripple current (100 Hz): < 1 %
Output current: 250-1000 mA
Power loss in stand-by mode: <0.25 W
Nominal voltage: 220-240 V
Nominal current: 1.1 A
Device power loss: 9 W
Power factor: > 0.95
Total harmonic distortion: < 10 %
ECG efficiency: <= 94 %
Protective conductor current: <0.5 mA
Inrush current: 25 A
Max. no. of ECGs on circuit breaker 10 A: 13
Max. no. of ECGs on circuit breaker 16 A: 21
Max. no. of ECGs on circuit breaker 25 A: 29
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Length: 280 mm
Width: 30 mm
Height: 21 mm
Product weight: 205 g
Mounting hole spacing, length: 270 mm
Cable cross-section, input side: 0.5-1.5 sqmm
Cable cross-section, output side: 0.5-1.5 sqmm
Casing material: Metal
Ambient temperature range: -25 +50 C
Temperature range at storage: 40 +85 C
Maximum temperature at tc test point: 75 C
Max.housing temperature in case of fault: 110 C
ECG lifetime: 50000 h
Encapsulated: No
Dimmable: Yes
Dimming range: 1 to 100 %
Suitable for fixtures with prot. class: I
Dimming interface: DALI / LEDset / Touch DIM
Constant Lumen Function: Programmable
NTC input: No
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Type of protection: IP20
Max. cable length to lamp/LED module: 2.0 m
Suitable for fixtures with prot. class: I
Suitable for emergency lighting: Yes
Type of connection, output side: Push terminal
Approval marks approval: ENEC 10 / VDE / EMC / EL / CE
Temperature range at storage: -25 +85 C

Additional Information

SKU FAV-LEDOTIDALI901A0
Barcode N/A
Manufacturer Osram
Manfacturer Code LEDOTIDALI901A0
Series N/A

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.