Tel: 01273 930040

Led Oti Dali 80/220-240/2a1 Lt2 L 4052899028050

Be the first to review this product

Availability: In stock

Only 10 left

Excl. Vat: £33.86 Incl. Vat: £40.63

Led Oti Dali 80/220-240/2a1 Lt2 L 4052899028050 LEDOTIDALI802A1 By Osram

Led Oti Dali 80/220-240/2a1 Lt2 L 4052899028050

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Related links:
LED Power Supply and Control Gear


Osram Led Oti Dali 80/220-240/2a1 Lt2 L 4052899028050 LEDOTIDALI802A1

OPTOTRONIC Intelligent - Dimmable DALI

OTi DALI 80/220-240/2A1 LT2 L

Product features

Supply voltage 220-240 V
Line frequency 0 Hz - 50 Hz - 60 Hz
Line voltage 198-264 V
Safety according to EN 61347-1, 61347-2-3, 61347-2-13, 62384
RI suppression according to EN 55015:2007+A1:2007/CDN
Line harmonics according to EN 61000-3-2
Immunity according to EN 61547
Lifetime: up to 100000 h (temperature at Tc = 65 C, max. 10 % failure rate)

Product benefits

Versatile DALI window driver up to 90 W due to flexible output characteristic
Very high efficiency and reliability
Protection of the system thanks to thermal management and Smart Control

Areas of application

Installation in emergency lighting systems according to IEC 61347-2-3, appendix J
Suitable for use in luminaires with flexible current setting (DALI, CLO, LEDset)
Suitable for indoor SELV and non-SELV installations
Suitable for luminaires of protection class I

Versatile scope of application due to DALI (GII) Ideology

Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz,
pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting

EAN: 4052899028050
Input voltage AC: 198-264 V
Input voltage DC: 176-276 V
Mains frequency: 50/60 Hz
Nominal output current: 1000-2100 mA
Nominal output voltage: 20-54 V
Device power loss: max. 10 W
Nominal voltage: 220-240 V
Power factor ? (full load at 230V): 0.95
ECG efficiency: 91 %
Power loss in stand-by mode: <0.5 W
Protective conductor current: <2 mA
Inrush current: 53 A
Max. no. of ECGs on circuit breaker 10 A: 8
Max. no. of ECGs on circuit breaker 16 A: 13
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
U-OUT (working voltage): 60 V
Output current tolerance: ?5 %
Nominal output power: 80 W
Galvanic isolation: SELV equivalent
Galvanic isolation primary/secondary: 3.75 kV
Length: 360 mm
Width: 30 mm
Height: 21 mm
Product weight: 285 g
Cable cross-section, input side: 0.5-1.5 sqmm
Cable cross-section, output side: 0.5-1.5 sqmm
Wire preparation length, input side: 8.5-9.5 mm
Wire preparation length, output side: 8.5-9.5 mm
Casing material: Metal
Ambient temperature range: -25 +45 C
Temperature range at storage: -25 +75 C
Maximum temperature at tc test point: 80 C
Max.housing temperature in case of fault: 120 C
ECG lifetime: 50000 h
Encapsulated: No
Dimmable: Yes
Dimming range: 1-100 %
Suitable for fixtures with prot. class: I
Dimming interface: DALI / Touch DIM / Touch DIM Sensor
Constant Lumen Function: Programmable
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2 m
Suitable for fixtures with prot. class: I
Type of connection, output side: Push terminal
Approval marks - approval: ENEC 10 / VDE / EMC / EL / CE
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384
Type of protection: IP20
Approval marks approval: ENEC 10 / VDE / EMC / EL / CE
Relative humidity: 5-85 %
Manufacturers Website:

Additional Information

Barcode N/A
Manufacturer Osram
Manfacturer Code LEDOTIDALI802A1
Series N/A

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.