Tel: 01273 930040

Led Driver Ot Dali 15/220-240/1a0 Lt2 4052899324879

Be the first to review this product

Availability: In stock

Only 78 left

Excl. Vat: £21.18 Incl. Vat: £25.42

Led Driver Ot Dali 15/220-240/1A0 Lt2 4052899324879 LEDOTDALI151A0LT2 By

Led Driver Ot Dali 15/220-240/1a0 Lt2 4052899324879

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Related links:
LED Power Supply and Control Gear

Details Led Driver Ot Dali 15/220-240/1A0 Lt2 4052899324879 LEDOTDALI151A0LT2

OTi DALI 15/220-240/1A0 LT2
Product Benefits:
Versatile DALI window driver due to flexible output characteristic
Very high efficiency and reliability
Protection of the system thanks to thermal management and Smart Control
High-quality dimming of 1-100 % by amplitude dimming (OTi DALI 15)
Product Features:
Supply voltage: 220-240 V
Line frequency: 0 Hz - 50 Hz - 60 Hz
Line voltage: 198-264 V
Safety according to EN 61347-1, 61347-2-3, 61347-2-13, 62384
RI suppression according to EN 55015:2007+A1:2007/CDN
Line harmonics according to EN 61000-3-2
Immunity according to EN 61547
Lifetime up to 100000 h (temperature at Tc = 65 C, max. 10 % failure rate)
Independent connection via through-looping (except OTi DALI 15)
Areas of Application:
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for use in luminaires with flexible current setting (DALI, CLO, LEDset)
Suitable for indoor SELV installations
Suitable for luminaires of protection classes I and II
Suitable for downlights, spotlights, LED panels, etc.
Optional cable clamp F-style for independent mounting (to be ordered separately)
Versatile scope of application due to OSRAM DALI Technology
Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
EAN: 4052899324879
Nominal voltage: 220-240 V
Mains frequency: 50-60 Hz
Input voltage AC: 198-264 V
Input voltage DC: 176-276 V
Total harmonic distortion: < 10 %
Power factor: 0.95
ECG efficiency: 88 %
Device power loss: 2.4 W
Power loss in stand-by mode: 0.27 W
Inrush current: 5 A
Max. ECG no. on circuit breaker 10 A (B): 80
Max. ECG no. on circuit breaker 16 A (B): 130
Max. ECG no. on circuit breaker 25 A (B): - -
Surge capability (L/N-Ground): 1 kV
Nominal output voltage: 7.5-54 V
U-OUT (working voltage): 60 V
Nominal output current: 150-1050 mA
Output current tolerance: +/- 3 %
Output ripple current (100 Hz): < 2 %
Nominal output power: 18 W
Galvanic isolation: SELV
Galvanic isolation primary/secondary: 3.75 kV
Length: 95 mm
Width: 53 mm
Height: 30 mm
Product weight: 100 g
Cable cross-section, input side: 0.2-1.5 sqmm
Cable cross-section, output side: 0.2-1.5 sqmm
Wire preparation length, input side: 8.0 - 9.0 mm
Wire preparation length, output side: 8.0 - 9.0 mm
Casing material: Plastic
Ambient temperature range: -20 +50 C
Maximum temperature at tc test point: 75 C
Max.housing temperature in case of fault: 100 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 50000 / 100000 h
Encapsulated: No
Dimmable: No
Dimming interface: DALI / Touch DIM / Touch DIM Sensor
Dimming range: 1-100 %
Dimming method: Amplitude Modulation
Constant lumen function: Programmable
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2 m
Suitable for fixtures with prot. class: I / II
Suitable for emergency lighting: Yes
Type of connection, output side: Push terminal
Approval marks approval: ENEC 10 / VDE / EMC / EL / CE
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384
Protection class: II
Type of protection: IP20
Manufacturers Website:

Additional Information

Barcode N/A
Manfacturer Code LEDOTDALI151A0LT2
Series N/A

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.