Tel: 01273 930040

Led Oti Dali 160/220-240/24 Tw 1-2 Channel Dim 4052899986312

Be the first to review this product

Availability: In stock

Only 21 left

Excl. Vat: £79.41 Incl. Vat: £95.29
OR

Led Oti Dali 160/220-240/24 Tw 1-2 Channel Dim 4052899986312 LEDOTIDALI160TW

Led Oti Dali 160/220-240/24 Tw 1-2 Channel Dim 4052899986312

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Related links:

Details

Led Oti Dali 160/220-240/24 Tw 1-2 Channel Dim 4052899986312 LEDOTIDALI160TW

CV Power supplies with DALI

The OSRAM constant voltage power supplies with DALI, enable you to maximize any design?s potential and enjoy flicker-free light due to a high PWM frequency,
dimmable to between 0.1 and 100 % with TouchDIM. Use from 1 to 4 channels and benefit from DALI message detection of LED module failure.
The slender form of these drivers makes them ideal for use when you need to install LED lighting in tight spaces or linear luminaires, for example in coves,
corridors and handrails, or for wall washing. They are suitable for 24 V LED modules and for use with luminaires of protection classes I and II.

Product benefits:

Intelligent power matching thanks to Smart power supply
Slim form factor for mounting on the cove or in linear luminaires
Flicker free thanks to high PWM frequency
Emergency lighting EL sign
Available as Tunable White version (DALI Device Type 8)
DALI message detection "LED Module failure"

Product features:

Dimmable via Touch DIM From 1 to 4 channels to arbitrary distribute the LED-power
Dimming range 0.1-100 %
Line frequency 0 Hz / 50 Hz / 60 Hz
Equipment / Accessories Suitable for 24 V LED modules

Areas of application:

Cove lighting, wall washer, corridor, handrail
Suitable for use in luminaires of protection class I and II

Equipment/Accessories

Suitable for 24 V LED modules

Technical data:

EAN: 4052899986312
Nominal voltage: 220-240 V
Mains frequency: 50/60 Hz
Input voltage AC: 198-264 V
Total harmonic distortion: < 5 %
Power factor: 0.99
ECG efficiency: 93 %
Device power loss: 11 W
Power loss in stand-by mode: 0.36 W
Inrush current: 69 A
Max. ECG no. on circuit breaker 10 A (B): 5
Max. ECG no. on circuit breaker 16 A (B): 8
Max. ECG no. on circuit breaker 25 A (B): 13
Surge capability (L-N): 1 kV
Nominal output voltage: 24 V
U-OUT (working voltage): 24.2 V
Nominal output power: 160 W
Galvanic isolation: SELV
Galvanic isolation primary/secondary: 3 kV
Length: 300 mm
Width: 50 mm
Height: 35 mm
Mounting hole spacing, length: 258 mm
Product weight: 380 g
Cable cross-section, input side: 0.5-2.5 sqmm
Cable cross-section, output side: 0.2-1.5 sqmm
Wire preparation length, input side: 6 mm
Wire preparation length, output side: 6 mm
Casing material: Plastic
Ambient temperature range: -20 +45 C
Maximum temperature at tc test point: 75 C
Max.housing temperature in case of fault: 110 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 50000 h
Encapsulated: No
Dimmable: Yes
Dimming interface: DALI
Dimming range: 0.1-100 %
Dimming method: Pulse Width Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 10 m
Suitable for fixtures with prot. class: I / II
Type of connection, output side: Screw terminal
Number of channels: 2
Approval marks - approval: CE / ENEC 10 / VDE / VDE-EMC / RCM / EAC / CCC / BIS
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 60598-2-22/Acc. to EN 62386/Acc. to EN 55015
Protection class: II
Type of protection: IP20
Temperature range at storage: -40 +85 C
Manufacturer's Website: https://www.osram.com/ds/ecat/CV Power supplies with DALI-Constant Voltage - Dimmable-Indoor ECG for LED modules and dimmers-Electronic Control Gears for LED modules and dimmers-Electronics

Additional Information

SKU FAV-LEDOTIDALI160TW
Barcode No
Manufacturer First-AV.co.uk
Manfacturer Code LEDOTIDALI160TW
Series N/A

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.